This single white socket spacer is designed for fitting 1-gang sockets neatly over tiles, plasterboard, acoustic panels or uneven walls. It provides a 15mm extension, making it ideal for retrofitting where the back box is recessed too far into the wall.

Highlights

Builds a 1-gang plate out by exactly 15mm to sit level with tiles or panelling
Fits the standard 86 x 86mm UK single footprint on metal or plasterboard boxes
White frame hides the wall gap behind White switches and sockets
Rigid moulded plastic, wipe-clean and paintable
Made in the UK by Alchemy Collectives

Key specifications

Depth: 15mm
Footprint: 86 x 86mm
Gang: 1-gang
Colour: White
Material: Rigid moulded plastic
Screw type required: M3.5 faceplate screws (not included)
Compatibility: Standard UK 1-gang plates, metal and dry-lining boxes
Origin: UK made

Pros

Fits in minutes with no chasing out or moving the back box
Lines up with all standard UK 1-gang plates
Clean finish with no wall gap on show behind White plates
Wipe-clean and paintable to suit the room

Cons

Longer M3.5 faceplate screws are not included, so you must source these separately
Only suits standard UK 1-gang plates, not 2-gang or euro modules
Wrong depth leaves a gap or a proud plate, so measure before ordering

Frequently asked questions

Will this spacer fit my existing UK single socket or switch?

It is sized to the standard UK single footprint of 86 x 86mm and fits all standard UK 1-gang light-switch and single-socket plates. It works with metal and dry-lining plasterboard 1-gang boxes.

What screws do I need and are they supplied?

You need longer M3.5 faceplate screws to suit the added 15mm depth. These screws are not included with the spacer.

How do I know if 15mm is the right depth?

This 15mm spacer suits tile-on-adhesive or shiplap. If the wall stands proud by a single layer of tiles or thick wallpaper, use 10mm. For deep panelling, slat walls or acoustic boards, use 20mm.